Horizontal packaging machine straps wrapped product or package, and then tighten the two ends are connected
by thermal effects such as melting or use package buckle material of the machine, the plastic belt can be
tied closely to the surface of the package to ensure that the package in transportation, storage is not a
result of bundling is not strong and scattered, while also tying neat appearance.
While horizontal packaging machine durability of excellence, but with the passage of time, mechanical wear,
large balers or will be some failures, the following is what we Brief common Horizontal Baler maintenance
Cassette handling: When the tape stuck in the middle of the wheel, or a foreign body plug can not be removed,
disassembled hex nut washer, loosen the middle connecting the two M5 countersunk head screws on the axis,
since the two screws in the connection notch axis, it must turn the screws on some; remove the connection
axis, the turbine will pick up, remove the jammed matter.
After a large baler tied tight with no cut: There are many situations can cause this situation, such as: an
elastic adjustment too tight; 2 slip sheet or skid belt with oil, wipe the oil must be removed; 3 belt too
tight.. , will cut down some of the seat belt drive, or some can tune the motor back.